5 Common Problems With Water Heaters Homeowners Might Face

Water heaters are one of the most important appliances in your home. They provide hot water for bathing, cooking, and doing laundry. But when they break, it can be a nightmare. There are several common water heater issues that can occur, and it’s important to know what to do when they happen.

1. Leaking From the Tank or Pipes

If your water heater is leaking from the tank or pipes, it’s important to turn off the power and water to the unit immediately. This will help prevent further damage. Once the power and water are off, you can try to identify the source of the leak. If it’s coming from a pipe, you may be able to repair the leak with a pipe repair kit. If the leak is coming from the tank, however, it’s likely that the tank will need to be replaced.

2. Not Enough Hot Water

If you’re not getting enough hot water from your water heater, it may be due to a problem with the heating elements. These elements can burn out over time and will need to be replaced.

If the heating elements are not the problem, it’s possible that the thermostat is set too low. You can try raising the thermostat to see if that solves the problem. If you have an electric water heater, it’s also possible that the circuit breaker has tripped. You can check the breaker box to see if this is the case.

3. Strange Noises

If you hear strange noises coming from your water heater, it’s possible that there is sediment build-up in the tank. This can happen over time and will need to be flushed out. If the sediment isn’t the problem, it’s possible that there is a leak in the tank.

4. Rust or Corrosion

Rust or Corrosion If your water heater is rusting or corroding, it may be due to a problem with the anode rod. The anode rod is a metal rod that is inserted into the water heater to help prevent corrosion. If the anode rod is corroded, it may be causing the water heater to rust or corrode. To fix this problem, you can replace the anode rod.

5. No Pilot Light 

If your water heater doesn’t have a pilot light, it may be due to a problem with the gas supply. If the gas supply is not connected properly, the pilot light will not stay lit. To fix this problem, you can check the gas supply and ensure it’s connected properly.

Conclusion

There are many common water heater issues that can occur, such as leaks, strange noises, or the unit not heating water properly. If you experience any of these issues, it is important to contact a professional to have the unit checked and repaired if necessary. By taking care of your water heater and addressing any issues promptly, you can help extend its lifespan and ensure that it continues to work properly for years to come.

Should an incident come in, don’t hesitate to call in an emergency plumber. Here at Bromac Mechanical, you’ll be assisted by a licensed residential or commercial plumber with experience in aiding Abbotsford homes and properties through the smoothest plumbing repair services. Call 604-360-2710 for a quote or a request for emergency services.